1:
Go to System Preferences.
This can be found from the Apple Menu & System Preferences option. |
 |
| 2:
Click on the Network icon. |

If this can not be seen click on the Show all icon
|
3:
TCP/IP
The following settings need to be set:
Configure:
Using PPP
IP Address:
Subnet Mask:
Router:
All "Provided by PPP Server"
DNS Servers:
194.247.47.47
194.247.40.126
Search Domains:
zetnet.co.uk
To view the PPP Options click on the PPP tab
|
 |
4:
PPP
This is where you need to enter your account details with ourselves.
The example shown here is generic, but you would need your 1000****
Zetnet Account number for the Account Name & associated password
with that Account.
Our general dial up number is 0845 059 1022.
You may wish to click on the PPP Options... to
check the configuration details therein.
|
 |
5:
PPP Options
The settings here are purely personal to your set up with ourselves,
but you you may wish to alter them as per your preferences.
|
 |
| 6:
If you use a Proxy/Filtered server with your account with
ourselves you may need to click on the Proxies tab to configure this
setting.
The setting for our 'Filtered' server is set in the example shown
- for this the setting should be
:
Address:
littlehat.zetnet.co.uk
Port:
8080
For our 'Web Cache' server you should use:
Address:
www-cache.zetnet.co.uk
Port:
3128
|
 |
| 7:
The Modem tab settings are particular to your computer &
would need to be set accordingly.
If you live in an area where your local exchange
is still using a 'switch' system (ie: when you dial a number on
your phone you can hear 'clicks') then use Pulse on the Dialing
option.
If you do not wish to hear your modem dial the use the Off on the
Sound option.
Show Modem Status in menu bar:
This will show you whether your modem is connecting, the time that
you have been online & if you are disconnecting on the Connection
Icon on the Menu Bar of the Desktop.
To save the settings click Apply Now button.
|
 |
8:
Connecting
You are now ready to connect.
Click on the 'telephone handset' icon to the right of the menu bar
& the drop down menu shown here is displayed.
Click on Connect. |
 |